采用温控和碘吸收池技术的发射激光稳频技术

多普勒测风激光雷达通过分析系统回波信号的多普勒频移反演出风速，为提高风场探测精度，从稳频技术方面展开研究。在稳频过程中，分别采取措施消除激光频率的长期漂移和短期抖动。针对激光频率的长期漂移，设计并研制了种子激光器温控箱，通过水浴的控温方式大大减小了激光频率的长期漂移，将激光频率稳定在±50 MHz以内；针对激光频率的短期抖动，采用以碘分子吸收池为核心器件的稳频系统，通过半导体控温方式对碘分子吸收池精确控温，控温精度达0.03 ℃，提高了稳频精度，将激光频率进一步稳定在±8 MHz以内，满足±10 MHz以内的设计精度要求。通过搭建多普勒测风激光雷达系统，对发射激光稳频装置进行系统验证，连续4组风场观测结果表明:系统探测高度为17 km，绝大部分方差在4 m/s以下，满足测风激光雷达测量指标的要求。     

Alterations in the Genomic Distribution of 5hmC in In Vivo Aged Human Skin Fibroblasts

5-Hydroxymethylcytosine (5hmC) is a functionally active epigenetic modification. We analyzed whether changes in DNA 5-hydroxymethylation are an element of age-related epigenetic drift. We tested primary fibroblast cultures originating from individuals aged 22–35 years and 74–94 years. Global quantities of methylation-related DNA modifications were estimated by the dot blot and colorimetric methods. Regions of the genome differentially hydroxymethylated with age (DHMRs) were identified by hMeDIP-seq and the MEDIPS and DiffBind algorithms. Global levels of DNA modifications were not associated with age. We identified numerous DHMRs that were enriched within introns and intergenic regions and most commonly associated with the H3K4me1 histone mark, promoter-flanking regions, and CCCTC-binding factor (CTCF) binding sites. However, only seven DHMRs were identified by both algorithms and all of their settings. Among them, hypo-hydroxymethylated DHMR in the intron of Rab Escort Protein 1 (CHM) coexisted with increased expression in old cells, while increased 5-hydroxymethylation in the bodies of Arginine and Serine Rich Protein 1 (RSRP1) and Mitochondrial Poly(A) Polymerase (MTPAP) did not change their expression. These age-related differences were not associated with changes in the expression of any of the ten-eleven translocation (TET) enzymes or their activity. In conclusion, the distribution of 5hmC in DNA of in vivo aged human fibroblasts underwent age-associated modifications. The identified DHMRs are, likely, marker changes.     

以新发展理念引领高校专业基础课教学改革

以“创新、协调、绿色、开放、共享”为内核的新发展理念，是对马克思主义发展理念的继承和发扬，极具时代精神，富含问题意识，为高校思想政治教育发展、教育教学改革实践提供了强大的理论支撑。本文以“通信原理”为例，阐述了新发展理念在课程改革中的思路和方法，实现了思想政治教育与专业基础课程有机融合，为深化高校教学改革、创新人才培养模式提供了思路。     

Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.     

Integrated rough VIKOR for customer-involved design concept evaluation combining with customers’ preferences and designers’ perceptions

Customer-involved design concept evaluation (DCE) allows customers to take part in evaluating the design alternatives to get more popular design concept. Traditional customer-involved DCE methods still focus on the collection of customer responses and only consider cost and benefit characteristics of design criteria in multi-criteria decision-making (MCDM) based evaluation process. Few studies have customized the decision-making algorithms specifically aimed at customers’ preferences. This paper further explores the customers’ influences in the early stages of the product design development, and proposes a new rough number based MCDM model (i.e., VIKOR) incorporating customers’ preferences for design specifications along with designers’ perceptions for the characteristics of design criteria (cost and benefit) to perform concept evaluation under subjective environment, and this proposed method is named as integrated rough VIKOR (IR-VIKOR). The objective of this study is to identify the best design concept which maximizes the satisfactions of expectations from most customers as well as conforms to the characteristics of design criteria. Firstly, Shannon entropy is used to obtain the weightings and relative importance ratings of design criteria from the customers’ preferences. Secondly, the customers’ preferences for design attribute values, the importance ratings of design criteria and the characteristics of design criteria are combined together to define the ideal solutions to calculate the rough evaluation index of each design alternative in IR-VIKOR, and finally the ranking result is provided by IR-VIKOR to determine the best design concept. A practical design example is introduced to illustrate the evaluation process of this proposed method, and the empirical comparisons are further carried out to validate its superiority for DCE. Through the sensitivity analysis experiments including i) inside IR-VIKOR, and ii) between IR-VIKOR and other classical MCDM methods, the proposed method is proved to be a reliable and feasible customer-involved DCE approach.     

Similarities and differences between male and female novice designers on color‐concept associations for warnings,action required,and signs and equipment status messages

This research examined the male and female novice designers toward color associations for the concepts used for ‘warnings’, ‘action required’, and ‘signs and equipment status’ through a questionnaire‐based study. A total of 178 Hong Kong Chinese final year undergraduate design students (89 males and 89 females) participated in the study. The test used required the participants to indicate their choice of one of nine colors to associations with each of 38 concepts in a color‐concept table, so that any one color could be associated with any one of the concepts. For both male and female groups of novice designers, chi‐square tests revealed a strong color association for each concept tested in this study (P < .05). The results showed males and females agreed on some color‐concept association stereotypes which were therefore gender neutral. The male and female novice designers had the same color associations and similar levels of stereotype strengths for 21 concepts. The nine strongest and therefore most useful color‐concept association stereotypes for both male and female novice designers were: red‐danger, red‐fire, red‐hot, red‐stop, red‐emergency, red‐error, blue‐cold, blue‐male, and green‐exit. However, the male and female novice designers had different color association stereotypes for the standby (green vs. yellow), emergency exit (green vs. red), and toxic (purple vs. black) concepts, and the strengths of the 14 remaining associations for both groups were not at equivalent levels. Overall, it is anticipated that the findings of this study will act as a useful reference for novice designers and other design practitioners to optimize color coding in the design of ‘warnings’, ‘action required’, and ‘signs and equipment status’ messages.     

Preprocessed dynamic classifier ensemble selection for highly imbalanced drifted data streams

This work aims to connect two rarely combined research directions, i.e., non-stationary data stream classification and data analysis with skewed class distributions. We propose a novel framework employing stratified bagging for training base classifiers to integrate data preprocessing and dynamic ensemble selection methods for imbalanced data stream classification. The proposed approach has been evaluated based on computer experiments carried out on 135 artificially generated data streams with various imbalance ratios, label noise levels, and types of concept drift as well as on two selected real streams. Four preprocessing techniques and two dynamic selection methods, used on both bagging classifiers and base estimators levels, were considered. Experimentation results showed that, for highly imbalanced data streams, dynamic ensemble selection coupled with data preprocessing could outperform online and chunk-based state-of-art methods.     

A novel function-structure concept network construction and analysis method for a smart product design system

The rapid growth of data and the requirement of designers to track massive data to obtain design stimuli have posed challenges to conceptual design, thereby promoting the development of data-driven design. Concept networks precisely capture design information from a large volume of unstructured and heterogeneous textual data and saliently decrease time and labor cost for designers to read texts, which creates new opportunities for developing a smart product design system. To advance data-driven design, this study proposes the novel function-structure concept network (FSCN) construction method, which combines sentence parsing and word/phrase extraction to integrate functional and structural information. Furthermore, a network analysis method is proposed to explore design information associations that contain both explicit and implicit associations together and thereby recommend them simultaneously to designers as inspirational stimuli to support design ideation. This approach can enhance designers' capabilities to build associations between design information, conceive new design ideas during conceptual design, and increase creativity for solving design problems. The proposed FSCN construction and analysis method can be used as an auxiliary tool to visualize associations among design information so as to inspire idea generation in the early stage of conceptual design. An illustrative example was used to validate the practicability of the proposed methodology. The code of the proposed method is available at https://github.com/KWflyer/FSCN.     

Improved multi-recessed 4H–SiC MESFETs with double-recessed p-buffer layer

An improved multi-recessed 4H–SiC metal semiconductor field effect transistor (MRD-MESFET) with double-recessed p-buffer layer (DRB-MESFET) is proposed in this paper. By introducing a double-recessed p-buffer layer, the gate depletion layer is further modulated, and higher drain saturation current and DC transconductance are obtained compared with the MRD-MESFET. The simulations show that the drain saturation current of the DRB-MESFET is about 42.4% larger than that of the MRD-MESFET. The DC transconductance of the DRB-MESFET is almost 15% higher than that of the MRD-MESFET and very close to that of double-recessed structure (DR-MESFET) at the bias conditions of V_gs=0 V and V_ds=40 V. The proposed structure has an improvement of 26.1% and 74.2% in the output maximum power density compared with that of the MRD-MESFET and DR-MESFET, respectively. In the meanwhile, the proposed structure possesses smaller gate-source capacitance, which results in better RF characteristics.